Advisers & research
For agronomists: sending spray suggestions farms can adopt in one tap
An agronomist’s job is to recommend, and the farm’s job is to decide. In FieldSafe, an adviser builds a season plan on a desk page for the Blocks a farm has shared, and sends it as a suggestion. The farm adopts it whole, adopts only the lines it ticks, or declines with a reason, and the adopted lines become planned jobs.
That is the whole idea. The rest of this article explains why it matters, what each side sees, and how it works when you advise many farms.
Why advisers waste time on WhatsApp PDFs
Most agronomists in the Lowveld and Limpopo work the same way. You walk the orchard, you take notes, and that evening you type up a programme in a spreadsheet or a Word document. You save it as a PDF and send it on WhatsApp or email. Then the trouble starts.
- The PDF is a dead end. The farm manager has to read it, then retype each line into a diary, a whiteboard or their own system. Every retyping is a chance for a wrong rate or a wrong Block.
- You lose sight of what happened. Did they do the second feeding? Did they move the copper spray because of rain? You only find out on your next visit, if at all.
- Versions pile up. “Programme v3 final FINAL.pdf” sits next to last month’s version in the same chat. Nobody is quite sure which one the team is following.
- Access is all or nothing. Some farm systems give an adviser a full login. That feels too open to many growers, and it puts you in a position you don’t want: able to change records that are not yours.
None of this is about the quality of the advice. It is about the hand-over. A good programme that is retyped badly, or followed from an old version, is not a good programme any more.
Season plans and suggestions
FieldSafe gives advisers their own workspace, separate from the farm. You never become a member of the farm and you hold no farm role. Here is how the work flows.
Getting connected to a farm
There are two ways in:
- The farm invites you. A farm Administrator sends an invitation to your email. The link lasts 7 days.
- You sign up as an adviser. You create an adviser account, and FieldSafe support confirms it before you start working with farms.
Either way, the farm decides which of its Blocks to share with you. You see those Blocks and nothing else.
Building the plan
From your workspace you open My Farms, pick a grower, and choose Suggest a season plan. It is a full desk page with:
- the season you are planning;
- the shared Blocks you are planning for;
- the work list, line by line: feeding, sprays, scouting and other jobs, each with its timing;
- ideas from the crop guide, which you can pull into the plan and change.
The crop guides cover 30 crops with stages and suggested activities. They are a starting point, not a prescription. In FieldSafe’s own words, guide items are “researched for information and direction: always check with your agronomist, or use these as suggestions.” When you are the agronomist, the ideas save typing, and your judgement decides what stays.
Sending it
When the plan is ready, you send it. It lands with the farm as a suggestion, and the farm’s Administrators get a push notification. Your Suggestions list shows each one and its status, so you know what was adopted, what is still waiting, and what was declined and why.
One thing FieldSafe does not do: it does not check product labels. If a line names a product and a rate, the label and the registration are still yours and the farm’s to confirm. FieldSafe never says a product is registered, safe or allowed.
What the farm sees
This is the part growers care about most, so it is worth being precise.
The farm’s Administrator or Manager opens the suggestion and sees every line. Then they choose:
| Choice | What happens |
|---|---|
| Adopt whole | Every line joins the farm’s own season plan, ready to plan as jobs. |
| Adopt ticked lines | Only the lines they tick join. The rest stay out. |
| Decline | Nothing joins, and they give a reason, which you can read. |
Overlap warnings
If a line overlaps with work the farm has already planned, FieldSafe shows an overlap warning. For example, you suggest a calcium feed in week 12, but the farm already has a feeding planned for those Blocks in the same week. The farm sees the clash before it adopts, and can untick that line. It is a warning, not a block: the farm decides.
Who holds the pen
Once lines are adopted, they are the farm’s. The manager plans jobs from them, assigns people, and the team records the work in the field, even with no signal. You do not edit farm records, and you cannot see anything beyond the shared Blocks. The farm can stop sharing when it chooses.
Outsiders suggest, the farm decides
Advisers, researchers and scouting-group coordinators all work on narrow grants. They propose; only the farm’s own Administrator or Manager adopts or approves. That is a design rule in FieldSafe, not a setting.
A practical example
Anneke is an independent citrus agronomist based in Letsitele. One of her clients is a fictional 60-hectare citrus farm run by Johan, who shares four navel Blocks with her.
In July, Anneke opens Johan’s farm in her workspace and builds a 12-month programme: feeding through spring, scouting rounds for thrips and false codling moth, and a set of sprays timed around flowering and fruit set. She pulls several lines from the crop guide’s ideas and adjusts the timing to what she saw on her last walk. She sends it.
Johan opens it on his laptop that evening. Two lines show overlap warnings: he already has a feeding planned on Block 3, and his packhouse has asked for a different timing on one spray. He ticks the other eight lines and adopts them. For the two he left out, Anneke can see the status in her Suggestions list, and the next week they talk it through on the phone.
The eight adopted lines are now in Johan’s season plan. His manager, Sipho, plans them as jobs, and the spray records the team captures in the field carry the Block, the products, who sprayed and the holds. Anneke did not need a login to Johan’s records to get her programme followed.
Working across client farms
Most advisers don’t have one client. FieldSafe’s adviser workspace is built for many.
- My Farms lists every farm that has connected with you, in one login.
- Each farm’s shared Blocks open in a farm view, so you see the crops and Blocks you are advising on.
- Suggestions across all your farms sit in one list with their status.
The farms stay separate. A grower in Tzaneen never sees what you suggested to a grower in Levubu, and neither sees anything of the other’s records. Each farm decides what to share with you.
For agronomists who work for a supplier or a packhouse, the same rules apply. The farm decides what to share and what to adopt. That clarity tends to make growers more willing to connect, not less.
Questions advisers often ask
Can I see the farm’s spray history? You see the Blocks the farm shares with you. You cannot see beyond those Blocks, and you cannot change records.
Does the farm have to adopt everything? No. Adopt whole, adopt ticked lines, or decline with a reason. Partial adoption is normal.
Does FieldSafe check my recommended products and rates? No. FieldSafe does not check the label. Confirm registration and rates on the current label and with the relevant authority.
What does it cost for advisers? FieldSafe is in early access and pricing is not set yet. Apply as an adviser for early access and you will hear first.
Getting started
FieldSafe is in early access and is being tested on a staging environment with a few test users. If you advise growers and want to send programmes they can adopt without retyping, apply as an adviser for early access. You can read more about how the adviser workspace works on the advisers page, how plans turn into work on jobs and planning, and what a farm’s records look like for one crop on the citrus page.
FieldSafe helps you prepare; certification is decided by your certification body.