Crops
Macadamia record keeping in South Africa: SAMAC, audits and the orchard
A macadamia farm in South Africa keeps three kinds of records: the ones the industry’s statutory measure asks for, the ones your processor and its buyers ask for in audits, and the ones you need yourself to run the orchard. Most of them come from the same few jobs: scouting, spraying, harvesting and delivering nuts to the factory. If those jobs are written down once, at the time, the rest mostly follows.
This article walks through a season on a fictional 40-hectare macadamia farm near Letsitele, in the Tzaneen area of Limpopo. FieldSafe was built with growers near Tzaneen, so the examples are close to home. Nothing here is legal or agronomic advice: check the current rules with the right people, and check pest and spray decisions with your agronomist.
Records SAMAC can ask for
Under the Marketing of Agricultural Products Act, the Minister can publish statutory measures for an industry. For macadamias, one such measure requires people in the industry, including growers, to keep certain records and send returns. Macadamias South Africa (SAMAC) is the industry body that works with these measures.
The details (who must keep what, for how long, and when returns are due) are set in the published measure, and measures are renewed and changed over time. So the honest advice is simple: check the current statutory measure. You can read a published version on acts.co.za: records to be kept and returns to be rendered, and then confirm with SAMAC that it is still the one in force.
In practice, the records behind any return are the ones you should already have:
| What you need to show | Where it comes from on the farm |
|---|---|
| How much nut-in-shell you harvested | Harvest records per Block and per day |
| What you delivered, and to whom | Delivery notes and dispatch records to the factory |
| Which Blocks and cultivars you farm | Your Block list with hectares, cultivars and planting dates |
| What you have on hand | Stores and drying records |
If those four are kept as you go, a return is a matter of adding up, not of digging through a cupboard.
What FieldSafe does here
FieldSafe does not file returns for you, and it does not know what the current measure asks for. What it does is keep the underlying records in one place: Blocks with crop details (cultivar, planting date, trees, spacing), harvest lots per Block, and dispatch to customers you add as Farm contacts. Every view has a CSV export, so the numbers you need are a download away.
Season calendar
A macadamia year has a rhythm, though the exact timing moves with cultivar, altitude and the season itself. In broad terms, a Tzaneen-area grower thinks about:
- Flowering and nut set, when pollination and early insect pressure matter;
- Nut development, when stink bug pressure is watched most closely and sprays are planned;
- Harvest, often from about autumn into winter, Block by Block;
- Post-harvest, with pruning, feeding, soil work and planning for next year.
These windows are general. Your own dates come from your Blocks, your cultivars and your agronomist.
On the fictional Letsitele farm, the manager, Pieter, builds a season plan in FieldSafe at the start of the year. He chooses the crop, the Blocks and a 12-month span, or starts from last year’s plan. Where FieldSafe has a crop guide for the crop, its stages and ideas show as windows that move when he changes the start date. FieldSafe describes that guide content as “Researched for information and direction — always check with your agronomist, or use these as suggestions.” Pieter’s agronomist can also send a suggested plan, and Pieter adopts only the lines he wants.
Scouting and traps
Stink bugs are the pest most macadamia growers talk about, because damage often shows only later, at the factory, as kernel damage. That makes good scouting records valuable twice: once for deciding when to spray, and again for explaining a spray to an auditor or a buyer.
A useful scouting record answers four questions:
- Where? The Block, and ideally the position.
- When? The date and time of the walk.
- What was found, and how was it counted? A count per tree, a share of trees affected, or a score. Zero counts too: “checked, nothing found” is a real finding.
- Who scouted? So the method stays consistent.
Methods differ between farms and advisers (beating trees, visual counts, traps), and thresholds for action are a decision for you and your agronomist.
In FieldSafe, Sipho, the farm’s scout, does a scouting walk on his phone. Each finding has a method (count per unit, % affected, or a 0–10 score) and the units checked, on a Block or on the farm by GPS. It works with no signal and sends itself later. Trap stations hold up to eight pests each; a trap check records the count per pest, whether the lure or liner was changed, a photo, or “could not check”.
If the farm belongs to a scouting group (a study group or consultant pooling counts), FieldSafe can share the farm’s chosen trap stations and walks with the group. Area figures show only when at least three farms contribute. Read more in Scouting groups: sharing pest pressure without sharing your farm and on the scouting and traps feature page.
Sprays and the pre-harvest interval
A spray record is where scouting turns into action, and it is the record auditors look at hardest. The full list of fields is in Writing a spray record that holds up. For macadamias, two points deserve extra care.
The reason. “Stink bug, scouting walk Block 7, 14 March” is a far stronger reason than “routine”. Link the spray to the scouting that triggered it.
The pre-harvest interval (PHI). The PHI is the minimum number of days between the last spray and harvest, set on the registered label. In a tank mix, the longest interval wins. Because nuts are often picked up over several weeks, it pays to know the earliest pick date per Block. See PHI and REI explained.
In FieldSafe, the product look-up fills the label rate and the longest withholding and re-entry periods from the product reference. These are marked “from the label” and can be edited, and FieldSafe does not check the label. When a spray is recorded, FieldSafe sets “Do not pick before” and “Keep out until…” holds on the Block. Everyone sees them, including workers on the map. The holds warn; they never block harvest, because the farm decides.
Harvest-to-factory traceability
Macadamia traceability runs from the Block, through harvest, dehusking and drying, to the bags or bins delivered to the cracking factory. If the factory finds a problem in a delivery, you want to answer quickly: which Blocks, which days, and which sprays went on before picking?
A practical chain on the Letsitele farm looks like this:
| Step | What to record |
|---|---|
| Harvest | Block, date, team, quantity, harvest lot number |
| Dehusking and drying | Which lots went in, where they were kept, and for how long |
| Storage | Bin or silo, date in, date out |
| Delivery | Delivery note number, factory, date, lots included, who loaded it |
FieldSafe’s harvest chain covers harvest lots, packed lots, storage and dispatch to customers, with “Trace back” to the Blocks and the sprays before picking. It records Storage, Kept in, Packed by and Loaded by, and each view exports to CSV. FieldSafe has no special dehusking or drying screen. Many farms will treat the dried, bagged nut-in-shell as the “packed” lot, and note the drying bin where it was kept. Quality and hygiene checks from the Check family can go alongside. A delivery note or factory result can be kept in Import records as “a record to keep”: the file is kept exactly as given, not read automatically.
Nomsa, the farm’s administrator, uses Trace back when the factory queries a delivery. In a few clicks she sees the lots, the Blocks they came from and the sprays applied before picking.
Audits macadamia buyers ask for
Processors and their export buyers often ask growers for food-safety and good-practice audits, and sometimes for social and environmental ones. In South Africa these commonly include GLOBALG.A.P. IFA, the GRASP worker-welfare add-on and SIZA. Which ones you need depends on your processor and its markets, so check with your processor or exporter.
Audits are optional in FieldSafe. With the switch on, the same spray, training, water and harvest records count as evidence for each audit that asks for them: GLOBALG.A.P. IFA v6 GFS, GRASP v2, SIZA Social 7.0 and SIZA Environmental 2.1. FieldSafe shows counts (“N with evidence · N missing · N need a look · N not needed here”), never a score. See the GLOBALG.A.P. IFA v6 page and the SIZA Social page.
Keep it in one place
FieldSafe is a farm record that works where your people work: scouting walks and spray records on any phone, with or without signal, and a harvest chain you can trace back in a few clicks. See how it fits macadamias on the macadamia page, and join early access. Built with growers near Tzaneen.
FieldSafe helps you prepare; certification is decided by your certification body.