Records how-to
Writing a spray record that holds up in an audit
A spray record holds up when someone who was not there can read it and know exactly what went onto which Block, when, why, by whom, with what equipment and in what weather. It names every product with its registration number and rate, the water volume, the target, and the waiting periods before picking and re-entry. The best way to get there is to write it at the tractor on the day, not at the office on Friday.
Most spray records that cause trouble in an audit are not wrong. They are thin. “Sprayed Block 4, copper, Monday” was true when it was written, but it answers none of the questions an auditor, a buyer or your own agronomist will ask six months later. This guide walks through the fields every record needs, shows a weak record next to a good one, and lists the gaps auditors find most often.
The fields every record needs
Different standards and buyers word their requirements differently, so always check the current official document for your audit (for GLOBALG.A.P., start at globalgap.org). In practice, a spray record that holds up nearly always shows:
- Where: the Block name or number, the crop and, if it matters, the cultivar. If you sprayed part of a Block, say which part.
- When: the date, plus the start and finish time.
- What: each product’s trade name, its registration number, the active ingredient, and the rate used (per hectare or per 100 litres, as the label states it).
- How much: the total quantity of each product and the total water volume, or the number of tanks and the tank size.
- Why: the target pest, disease or weed.
- Who and with what: the operator who applied it, and the sprayer or equipment used.
- Weather: conditions at the time of spraying.
- Waiting periods: the pre-harvest interval (the days before you may pick) and the re-entry interval (how long people must stay out). Our article on PHI and REI explains both.
A good record next to a weak one
Here is the same spray on a fictional 40-hectare macadamia farm near Letsitele, written two ways.
| Field | Weak record | Record that holds up |
|---|---|---|
| Where | “Block 4” | Block 4 (macadamia, Beaumont), whole Block, 6.2 ha |
| When | “Monday” | 3 March 2026, 06:10 to 08:40 |
| Product | “Copper” | Product name as on the label, registration number L XXXX (example), copper oxychloride |
| Rate | “Normal rate” | 200 g per 100 L water |
| Quantity | (blank) | 24 kg product, 12,000 L water (6 tanks of 2,000 L) |
| Target | (blank) | Husk spot, after scouting found early lesions |
| Operator | “Team” | Sipho, sprayer operator (training on file) |
| Equipment | (blank) | Mist blower 2, calibrated 12 February 2026 |
| Weather | (blank) | Clear, light breeze, 19 °C, no rain |
| PHI and REI | (blank) | Waiting days and re-entry hours as written on the label |
The registration number above is an example, not a real product. The point is the difference in detail. The weak record is not a lie; it simply cannot prove anything. The good record could be checked line by line against the label, the stock book and the sprayer’s calibration slip.
Tank mixes
Many sprays are tank mixes: an insecticide, a fungicide and an adjuvant in the same tank. Each product needs its own line, with its own registration number, rate and total quantity. “Mix A” is not a record.
Tank mixes also matter for waiting periods. When products carry different pre-harvest or re-entry intervals, the longest one applies to the whole spray.
In FieldSafe, a spray plan or spray record holds 1 to 10 products, each with its name, registration number and rate. Each tank-mix line can also name the stock batch it came from, so the spray takes stock off as it is saved.
Reason for spraying (the scouting link)
“Why did you spray?” is a question auditors ask more and more. A good answer links the spray to something you saw: a trap count over your threshold, damage found on a scouting walk, a disease-risk period, or a programme your adviser recommended.
You do not need an essay. One line naming the target, plus a scouting or trap record from the days before, tells the story. If you keep scouting on paper, file the sheet with the spray record. If you keep it in FieldSafe, trap checks and scouting walks sit in the same Block’s history as the spray. See scouting and traps.
Weather and equipment
Weather at spraying is one of the fields most often left blank, because nobody wants to write it up after the job. Record at least the general conditions: clear or cloudy, wind, temperature and whether rain fell or was expected. Your standard or buyer may ask for more detail, so check.
Equipment matters too. Name the sprayer, and keep its calibration record where it can be found. A rate on paper means little if the sprayer was never checked. A sprayer calibration template helps if you do not have one.
In FieldSafe, the weather at spraying is filled from the forecast nearest the spray time. It shows as a suggestion you can see and change, and it goes into the spray register export. If rain is forecast on a planned spray day, FieldSafe warns you. It does not enforce any wind limit, so the operator’s judgement and the label still decide.
Who applied it, and their training
“Team” or “the sprayer” is not an operator. Name the person who sprayed. Then make sure that person’s training record is on file: who trained them, when, and when a refresher is due. Our article on farm worker training records covers this in more detail.
FieldSafe treats this one as a hard rule: a spray record must name who sprayed, or it will not save. Training and credentials sit on each person’s page, and a sprayer authorisation can be recorded as a credential. If the operator’s authorisation is missing or expired, FieldSafe warns rather than stopping the work, so the manager can sort it out.
Keeping it for at least two years
How long must you keep spray records? Many schemes expect at least two years, and some buyers and export markets ask for longer. Check the current official document for your standard, and ask your buyer or exporter. When in doubt, keep them longer.
Paper fades, gets wet and gets lost. Whatever system you use, make sure records can be found by Block and by date, and that a copy exists somewhere other than the shed.
Common gaps auditors find
These come up again and again on farm audits:
- No registration number, or a number that does not match the product.
- Rates without totals, so nobody can check the stock book.
- Stock that does not add up: the store shows more used than the spray records explain, or the other way round.
- No operator name, or a name with no training on file.
- Blank weather, filled in later from memory, or not at all.
- No reason for spraying.
- Waiting periods missing, or pickers in a Block before the interval ended.
- Records written days later, in one handwriting and one pen, for a whole week.
The last one is worth a word. Auditors read records for a living. A week of sprays written up neatly on Friday afternoon looks exactly like what it is. Records made on the day, at the tractor, are more detailed and more believable.
Capture at the tractor, not on Friday
The fix for most of these gaps is timing. When the record is made where the work happens, the weather is in front of you, the tank count is fresh and the operator is standing there.
That is the idea behind FieldSafe’s spray records. The manager plans the spray on a desk screen, with the products, rates and Blocks. The record on the phone starts from that plan, so the operator confirms rather than retypes. It works with no signal and sends itself when the phone is back in range. The product look-up can fill the registration number, label rate and waiting periods from the label summary. They are marked “from the label”, you can edit them, and FieldSafe does not check the label: what is saved is as written by your farm.
If your farm switches audits on, a saved spray record also shows which audits it counts for, such as GLOBALG.A.P. IFA v6. FieldSafe never decides whether a record is “enough”. That is for your certification body.
Not using an app yet?
A good paper record beats a weak digital one. Our free spray record template has every field from this article, ready to print.
Start with the template, or do it on the phone
Download the free spray record template and start using it this week. If you would rather capture sprays on any phone, with or without signal, join early access and we will show you how FieldSafe does it.
FieldSafe helps you prepare; certification is decided by your certification body.