Free template
Sprayer calibration record: free printable template
This sprayer calibration record is a free A4 sheet for checking one sprayer: the settings, the measured output of each nozzle and the litres per hectare that result. It is for sprayer operators, workshop staff and farm managers who calibrate before the season and after any change of nozzles.
Free and ungated. A4 portrait.
How to fill in the sprayer calibration record
- Clean the filters and nozzles first. Fill the tank with clean water only.
- Set the pressure and the gear you spray with. Write them at the top.
- Measure forward speed: time the tractor over 100 m in the Block. km/h = 360 ÷ seconds.
- Catch each nozzle's output for one minute into a measuring jug. Do it twice and write both.
- Compare each nozzle with the chart for its type and pressure. Clean or replace the ones that are off.
- Add up the total output and work out L/ha with the formula on the sheet.
- Sign it and write the next due date.
Common mistakes
- Many advisers replace a nozzle that is more than about 10% off the chart. Check with your adviser or nozzle supplier.
- Calibrate again after changing nozzles, pressure, gear or tractor. The old figures no longer hold.
- Keep the sheet with the sprayer's service record, so both are found together.
Or do it on your phone
Or do it on your phone, offline, with FieldSafe
The same record, captured once in the field with or without signal, then reused for stock, history and audits.
Join early access See the feature →Preview of the sheet
This is what prints. Use your browser's print, or "Save as PDF".
Sprayer calibration record
Farm record sheet · keep with your farm records
Farm
Date
Equipment (sprayer name / no.)
Tractor and gear
Nozzle type and count
Pressure (bar)
Forward speed (km/h)
Row width (m)
Total output (L/min)
Output (L/ha)
Done by
Next due
| Nozzle position | Nozzle type / colour | Output 1 (L/min) | Output 2 (L/min) | Average (L/min) | From nozzle chart (L/min) | Keep / clean / replace |
|---|---|---|---|---|---|---|
| e.g. Left 3 (from top) | Hollow cone, brown | 1.42 | 1.46 | 1.44 | 1.50 | Keep |
Done byDate
Checked by (manager)Date
- L/ha = total output (L/min) × 600 ÷ (speed km/h × row width m).
- Speed: km/h = 360 ÷ seconds taken to drive 100 m.
- Follow the label's water volume and the sprayer maker's settings. FieldSafe does not check the label.
- Free template from fieldsafe.co. Or do it on your phone, offline, with FieldSafe.
On your phone instead
Skip the clipboard, keep the record
In FieldSafe the same details are filled from your plan, saved on the phone with no signal, and counted wherever your records are needed.
Related
Early access
Or do it on your phone, offline, with FieldSafe
FieldSafe is in early access. Join, and we help you set up your farm and try it on your team's own phones.