Records how-to

Water-use records for SIZA and GLOBALG.A.P.: meters, licences and per-tree irrigation

FieldSafe team · Draft, scheduled

FieldSafe water use per source per month, against the permit
Water use per source per month, with the yearly total against the permitted amount.

Good water-use records start with a list of your water sources and their authorisations, add regular meter readings from each source, and connect those to irrigation records per Block. Together they show how much water you take, where it goes, and how it compares with what you are allowed and what you harvest. Auditors for SIZA Environmental and GLOBALG.A.P. look for exactly that story.

Water is under more pressure every year in the Lowveld and across South Africa, and buyers and auditors know it. This article covers what auditors usually ask for, how to make meter readings useful, and gives practical examples of daily irrigation records.

What auditors ask for

Requirements differ between standards and versions, so check the current official document for your audit: globalgap.org for GLOBALG.A.P. and siza.co.za for SIZA. In practice, auditors commonly look for:

  • A list of water sources: boreholes, rivers, dams, canal allocations, municipal supply, with where each is.
  • Authorisation for each source: a water-use licence, general authorisation, registration or scheme allocation, as applies.
  • Meter readings showing how much was taken from each source.
  • Irrigation records showing where the water went.
  • Water quality tests, for irrigation water and for water used on the crop or by people.
  • A water risk assessment and a plan to use water carefully.
  • Increasingly, water use compared with what you produced.

SIZA Environmental gives water a full section of its own. Our page on SIZA Environmental and our article on SIZA Social vs Environmental cover how it fits together.

Meter readings that make sense

A meter reading on its own is just a number. It becomes useful when it is read on a regular day, from a named meter, and turned into how much was used.

Read on a fixed schedule

Weekly is a good rhythm in the irrigation season, monthly at the least. Read on the same day each week, for example every Monday morning, so the numbers can be compared.

Record the reading, not just the use

Write down the actual number on the meter, then work out the use since the last reading. If you only record the difference, one mistake carries forward and nobody can check it.

Know where each meter is

Give every meter a name or number that matches your water-source list, and mark it on the farm map. A reading from “the meter by the shed” is hard to trust when there are two sheds. If a meter is faulty, replace or fix it soon and record the date, because months of estimated readings weaken the whole record.

Note anything unusual

A meter replaced, a reading that could not be taken, a pipe burst. A note explains a gap that would otherwise look suspicious.

DateMeterReading (m³)Used since last (m³)Read byNote
6 Oct 2026Borehole 148,2121,140Lerato
13 Oct 2026Borehole 149,3981,186Lerato
20 Oct 2026Borehole 149,4024LeratoPump repaired, off 5 days
27 Oct 2026Borehole 150,6111,209Lerato

Our free water meter log has these columns, one page per meter.

Water sources and authorisations

Every source you take water from should be on one list, with its authorisation details: the reference number, how much you may take per year, and when it was issued or renewed.

South African water law sets out who needs a licence or registration and under what conditions, and this differs by source, area and volume. FieldSafe does not give legal advice. For water-use authorisation details, check with the Department of Water and Sanitation or your irrigation board or water user association.

FieldSafe water-source register with permits, capacity and meters
The water-source register: each source with its permit reference, capacity and linked meter.

In FieldSafe, the water-source register holds each reservoir or tank, borehole and other source, with its capacity, permit reference, permitted cubic metres per year and the meter linked to it. You can save a water source straight from the farm map. The authorisation documents themselves can be kept with the farm’s documents, exactly as given.

Water tests

Most standards expect a water quality test, usually from an accredited laboratory, at a frequency based on your risk. The sample points and what is tested depend on how the water is used: irrigation, mixing sprays, washing produce or drinking. Check the current official document for your standard and ask your laboratory.

Keep the lab report, the date of sampling, where the sample was taken and any action you took on the results. In FieldSafe you can add the lab report as a record to keep. The file is kept exactly as given; FieldSafe does not read it automatically.

Water per kg of crop

More buyers now ask how much water it took to grow a kilogram of fruit. It is a fair question: it shows whether water use is improving year on year, and it lets you compare Blocks.

The calculation is simple once the records exist:

water applied to a Block in a season (litres) divided by the crop harvested from that Block (kg)

Here is a worked example. Block 5 on a fictional macadamia farm near Levubu received 9,200 m³ of irrigation over the season, which is 9,200,000 litres. The Block produced 18,400 kg of nut-in-shell. That is 500 litres per kilogram. On its own, the number means little. Next season, if the same Block yields 20,000 kg on 8,800 m³, it drops to 440 litres per kilogram, and you can show a buyer that water use per kilogram improved. Compare a Block with its own past first, because rainfall, tree age and cultivar all make Blocks differ.

The hard part is getting both numbers per Block. Water is often metered per source, not per Block, so you need irrigation records that say how much went where. And harvest must be recorded per Block, not just per day.

The Water use report in FieldSafe shows cubic metres per source per month, yearly totals against the permitted amount, and litres per kilogram harvested per Block. It exports to CSV for your adviser or buyer. See irrigation and water.

Daily irrigation examples

“Give examples of daily records for an irrigation system” is a common question. Here are three, from a fictional 30-hectare citrus and macadamia farm near Letsitele.

Example 1: drip, recorded per tree

DateBlockWater sourceLitres per treeTreesTotal (m³)FertigationRecorded by
14 Oct 2026Block 2 (citrus)Borehole 1402,40096NoneSipho

Example 2: micro-sprinklers, recorded by running time

DateBlockValveStartStopHoursFlow (m³ per hour)Total (m³)Recorded by
14 Oct 2026Block 5 (macadamia)Valve 5A05:0009:0042288Sipho

Example 3: daily system checks

DatePump pressureFilter cleanedLeaks foundActionChecked by
14 Oct 20263.2 barYesDrip line Block 2, row 14Repaired same dayNomsa

Add a rain gauge reading on the same sheet, and you can see why irrigation stopped after a good shower.

FieldSafe plans irrigation either per tree in litres or by running time, and the plan can name a saved water source. The crew records it on the phone, with or without signal, alongside meter readings, pump, filter, pipe and tank maintenance, and rain gauge readings in tenths of a millimetre. If your farm switches audits on, irrigation and water-source records show which audits they count for. Our free irrigation record template covers the first two examples on paper.

Try it on your own water sources

Start with the free irrigation record and water meter log templates. Or join early access to try water sources and the Water use report in FieldSafe on your own farm.

FieldSafe helps you prepare; certification is decided by your certification body.

Early access

Be one of the first farms on FieldSafe.

FieldSafe is in early access. Join, and we help you set up your farm and try it on your team's own phones.

Join early access