Free template

Irrigation record sheet: free printable template per Block

This irrigation record sheet is a free A4 form for writing down every irrigation: which Block, from which source, for how long and how much water went on. It is for growers, irrigation supervisors and workers who open the valves and want water records that add up.

Download CSV (Excel)

Free and ungated. A4 landscape.

How to fill in the irrigation record sheet

  1. Write one line each time a valve or station is opened.
  2. Name the Block and the water source (borehole, dam, river, scheme).
  3. Read the meter before you open the valve and again when you close it.
  4. Write the running time in minutes. If you know the dripper output, also write litres per tree.
  5. Work out m³ used: meter after minus meter before.
  6. Note any leaks, burst pipes or blocked drippers so they can be fixed.

Common mistakes

  • If two Blocks run off one meter at the same time, write that down. Otherwise the m³ will look doubled.
  • Do not guess a meter reading. Leave it blank and write why.
  • Add up m³ per source each month and compare it with the water you are allowed to take.

Or do it on your phone

Or do it on your phone, offline, with FieldSafe

The same record, captured once in the field with or without signal, then reused for stock, history and audits.

Join early access See the feature →

Preview of the sheet

This is what prints. Use your browser's print, or "Save as PDF".

Irrigation record

Farm record sheet · keep with your farm records

fieldsafe.co

Farm

Month

Irrigation system (drip, micro, other)

DateBlockWater sourceValve / stationStart timeRunning time (min)Litres per treeMeter beforeMeter afterm³ usedRecorded byProblems (leaks, blocked drippers)
e.g. 2026-10-20Block 7 BeaumontBorehole 2Valve 306:002401201845218590138ThandiTwo blocked drippers, row 14
            
            
            
            
            
            
            
            
            
            
            
            
            
            

Recorded byDate

Checked by (supervisor)Date

  • m³ used = meter after − meter before. 1 m³ = 1,000 litres.
  • Check your water use authorisation and reporting with the Department of Water and Sanitation or your water user association.
  • Free template from fieldsafe.co. Or do it on your phone, offline, with FieldSafe.

On your phone instead

Skip the clipboard, keep the record

In FieldSafe the same details are filled from your plan, saved on the phone with no signal, and counted wherever your records are needed.

FieldSafe traps and rain gauges on a phone, nearest first

Early access

Or do it on your phone, offline, with FieldSafe

FieldSafe is in early access. Join, and we help you set up your farm and try it on your team's own phones.

Join early access